Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: GPL-3.0-or-later
pragma solidity 0.8.10;

import "../interfaces/ISushiXSwapV2Adapter.sol";
import "openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";

contract SquidAdapter is ISushiXSwapV2Adapter {
    using SafeERC20 for IERC20;

    address public immutable squidRouter;

    address constant NATIVE_ADDRESS =
        0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;

    constructor(address _squidRouter) {
        squidRouter = _squidRouter;
    }

    /// @inheritdoc ISushiXSwapV2Adapter
    function swap(
        uint256 _amountBridged,
        bytes calldata _swapData,
        address _token,
        bytes calldata _payloadData
    ) external payable override {
        revert();
    }

    /// @inheritdoc ISushiXSwapV2Adapter
    function executePayload(
        uint256 _amountBridged,
        bytes calldata _payloadData,
        address _token
    ) external payable override {
        revert();
    }

    /// @inheritdoc ISushiXSwapV2Adapter
    function adapterBridge(
        bytes calldata _adapterData,
        address,
        bytes calldata,
        bytes calldata
    ) external payable override {
        (address token, bytes memory squidRouterData) = abi.decode(
            _adapterData,
            (address, bytes)
        );

        if (token != NATIVE_ADDRESS) {
            IERC20(token).forceApprove(
                squidRouter,
                IERC20(token).balanceOf(address(this))
            );
        }

        (bool success, bytes memory returnBytes) = squidRouter.call{value: address(this).balance}(squidRouterData);
        if (!success) {
            assembly {
                revert(add(32, returnBytes), mload(returnBytes))
            }
        }
    }

    /// @inheritdoc ISushiXSwapV2Adapter
    function sendMessage(bytes calldata _adapterData) external override {
        revert();
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later

pragma solidity 0.8.10;

import "./IPayloadExecutor.sol";

interface ISushiXSwapV2Adapter {
    
    /// @dev Most adapters will implement their own struct for the adapter, but this can be used for generic adapters
    struct BridgeParamsAdapter {
        address tokenIn;
        uint256 amountIn;
        address to;
        bytes adapterData;
    }

    struct PayloadData {
        address target;
        uint256 gasLimit;
        bytes targetData;
    }
    
    /// @notice Perform a swap after post bridging
    /// @param _amountBridged The amount of tokens bridged
    /// @param _swapData The swap data to pass to RouteProcessor
    /// @param _token The address of the token to swap
    /// @param _payloadData The payload data to pass to payload executor
    function swap(
        uint256 _amountBridged,
        bytes calldata _swapData,
        address _token,
        bytes calldata _payloadData
    ) external payable;

    /// @notice Execute a payload after bridging - w/o pre-swapping
    /// @param _amountBridged The amount of tokens bridged
    /// @param _payloadData The payload data to pass to payload executor
    /// @param _token The address of the token to swap
    function executePayload(
        uint256 _amountBridged,
        bytes calldata _payloadData,
        address _token
    ) external payable;

    /// @notice Where the actual bridging is executed from on adapter
    /// @param _adapterData The adapter data to pass to adapter
    /// @param _swapDataPayload The swap data payload to pass through bridge
    /// @param _payloadData The payload data to pass to pass through bridge
    function adapterBridge(
        bytes calldata _adapterData,
        address _refundAddress,
        bytes calldata _swapDataPayload,
        bytes calldata _payloadData
    ) external payable;
    
    /// @notice Where the actual messaging is executed from on adapter
    /// @param _adapterData The adapter data to pass to adapter
    function sendMessage(bytes calldata _adapterData) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
     * 0 before setting it to a non-zero value.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: GPL-3.0-or-later

pragma solidity 0.8.10;

interface IPayloadExecutor {
    /// @notice Execute a payload
    /// @param _data The data to pass to payload executor
    function onPayloadReceive(bytes memory _data) external payable;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

{
  "remappings": [
    "axelar-gmp-sdk-solidity/=lib/axelar-gmp-sdk-solidity/",
    "ds-test/=lib/forge-std/lib/ds-test/src/",
    "forge-gas-snapshot/=lib/forge-gas-snapshot/src/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "erc4626-tests/=lib/openzeppelin-contracts/lib/erc4626-tests/",
    "openzeppelin/=lib/openzeppelin-contracts/contracts/",
    "squid/=lib/squid/contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 999999
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs"
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "london",
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_squidRouter","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"bytes","name":"_adapterData","type":"bytes"},{"internalType":"address","name":"","type":"address"},{"internalType":"bytes","name":"","type":"bytes"},{"internalType":"bytes","name":"","type":"bytes"}],"name":"adapterBridge","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amountBridged","type":"uint256"},{"internalType":"bytes","name":"_payloadData","type":"bytes"},{"internalType":"address","name":"_token","type":"address"}],"name":"executePayload","outputs":[],"stateMutability":"payable","type":"function"},{"inputs":[{"internalType":"bytes","name":"_adapterData","type":"bytes"}],"name":"sendMessage","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"squidRouter","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_amountBridged","type":"uint256"},{"internalType":"bytes","name":"_swapData","type":"bytes"},{"internalType":"address","name":"_token","type":"address"},{"internalType":"bytes","name":"_payloadData","type":"bytes"}],"name":"swap","outputs":[],"stateMutability":"payable","type":"function"}]

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

000000000000000000000000ce16f69375520ab01377ce7b88f5ba8c48f8d666

-----Decoded View---------------
Arg [0] : _squidRouter (address): 0xce16F69375520ab01377ce7B88f5BA8C48F8D666

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 000000000000000000000000ce16f69375520ab01377ce7b88f5ba8c48f8d666